Segmented wood pen with a Herringbone 360 twist design that has 74 pieces of wood glued together to make the pen blank. The herringbone 360 design is such that when you turn the pen the design wraps around the pen in a 360 degree pattern. Woods used are Ebony, Maple, and Redheart with the Celtic Knot being of four woods with Redheart, Ebony, dyed blueish green Maple, and Holly. Note, on photos 2 & 5 the white mark on the bottom of the green ring is a natural lighter marking in the wood and not a crack.
Antiqued Pewter hardware was used for all the pen parts. The cap of the pen replicates a knights helmet made of many pieces of metal riveted together. A pocket clip with a medieval sword and a fluted lower point highlight this pen.
This is not a decal or pen inlay kit, much different in that the colors on this pen go all the way through from one side to the other. If this pen was cut in half you would see the different colored rings in the very center, it is a solid wood pen made up of many segmented parts put together.
This could be a very special pen for someone's desk.
The pen has a CA finish that is polished to 12,000 grit level for a very high shine. A Parker refill or a Parker Gel refill will fit this pen.
Pen is 5" long and is 1/2" in diameter.
Weight is about 2oz.
Check out my other site for more items at http://www.pensbykstrauss.com
Just contact me within: 3 days of delivery
Ship items back to me within: 7 days of delivery
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for: