PENSBYKSTRAUSS - Beautiful Pens and Various Items New and Vintage
Image 1 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 2 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 3 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 4 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 5 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 6 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 7 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 8 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 9 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 10 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 11 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 12 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 13 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 14 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 15 of LP Record Case, Gator Leather With Copper Trim, #0312
Image 16 of LP Record Case, Gator Leather With Copper Trim, #0312
1 / 16
1 of 16

LP Record Case, Gator Leather With Copper Trim, #0312

$249.00

LP record carry case that is handmade with solid wood, Gator upholstery leather outside with solid copper protective corners and edging. The copper edging and corners were hand formed from copper coil stock. A hand rubbed antiqued finish is applied to all the copper pieces. Heavy duty snap closures prevent case from opening when carrying. A metal and resin handle that is bolted through the top of the case for reinforced strength for carrying the weight of approximately 40 twelve inch 33 1/3 single cover LP's.
The last photo shows the copper edging after the hand rubbed finish was applied.

Interior of the case is heavy Tiger pattern fabric that will protect your album covers from wear and tear. A perfect way to store your LP's and be able to transport them without loading into a box and such.

The wood case sides are made of 3/4" solid wood. The front, back, top, and bottom are all 1/2" wood. All corners have box joints that are notched, glued and nailed. Interior and exterior fabrics are contact glued 100 % and will not sag or ripple. Four padded felt feet to prevent scuffing furniture along with anti-bump hinge spacers for top cover copper edging protection.
This is the ultimate carry case, as it is not a typical aftermarket import. Handmade piece by piece with top quality parts this is truly one of a kind quality item. With a little care this case will last a long time for the serious LP collector.

Case measurements, outside - 14 3/4" wide, 14" high, 7 1/2 deep. Inside is 12 7/8" wide, 6 1/4"
deep.
Completely handmade in the pensbykstrauss shop.

Reviews